The modern vehicles now rely a lot on the on-board computers in detecting any hazard while on the move, to minimize the probability of accidents from every possible way it may come. The more number of sensors your car is equipped with, the more your driver enjoys the advantage of safe driving. The only step he needs to take in response to these sensors, is taking the right action at soon as the sensors alert him about anything hazardous or risky.

How the Sensors Ensure Safety

The auto experts at the Sicklerville Genesis dealer explained that after receiving and processing all the information that the onboard computer of your vehicle collects from the different sensors, it starts sending alerts to the driver immediately, so that he can take the right action based on the alert. When these sensors fail the car faces a high-risk safety issue, especially if the driver is unaware about the impairment.

So, if you have a car that is comprised of multiple sensors, here is a brief guide on them that will make you aware of how they work, and how to know if they are in tune.

Sensor for ABS Speed

These are sensors that are made to monitor the speed of the wheels that it sends to the ABS computer. Using this information the computer that further acts upon to prevent the brakes from locking when there is a need to during stop the vehicle at once in an emergency.

Sensor for Accelerator Pedal Position

These are sensors that can detect the position of accelerator of the vehicle and it works in tune with the electronic throttle control.

Sensor for Measuring Coolant Temperature

This kind of sensor is used to measure the changes of resistance that happens because of the temperature. The information sent by this sensor to the computer is further used to trim down the delivery and timing of the fuel based on the temperature of the engine coolant.

Knock Sensor

Knock sensors are made to create a voltage signal that are based on vibrations that are caused by the detonation, that the computer makes use of to retard the timing when knock occurs to the Spark plug.

Sensor for Manifold Absolute Pressure

It is a kind of sensor that is used to convert the engine vacuum and manifold pressure into electrical signal. This signal is then used by the computer to determine the load that the engine is carrying. This sensor data works as the basis for the delivery and timing control of the fuel.

Sensor to Detect Throttle Position

This sensor moves with the throttle and is held responsible for generating a voltage signal that is indicative of the throttle position as well as the speed of movement data, that the computer further makes use of to measure the load of the engine, clear off the flood mode, adjust the timing and delivery of fuel, EGR, and also act as a converter to the operation of the clutch, says one of the mechanics of the famous Genesis Dealer Near Sicklerville.

These are the basic sensors without which the modern vehicles will not be able to perform properly. But the modern cars are now having yet more sensors that can also detect any obstacle around the vehicle, any unauthorized touch and more.